Oven not heating
Cause: The oven did not heat up in time: failed igniter, element or relay.
What to do: The heating circuit needs testing.
Home / Cusseta / Oven & range repair
Gas and electric ranges, cooktops and built-in wall ovens. We reach Cusseta (36852) in about 45 minutes.
What we hear most in Cusseta
| Repair | Typical time | |
|---|---|---|
| Oven igniter replacement | ~45 min · 3 mo warranty | |
| Bake / broil element replacement | ~45 min · 3 mo warranty | |
| Surface burner repair | ~40 min · 3 mo warranty | |
| Temperature sensor replacement | ~40 min · 3 mo warranty | |
| Control board repair | ~90 min · 3 mo warranty | |
| Glass cooktop replacement | ~90 min · 3 mo warranty |
Code on the display?
Cause: The oven did not heat up in time: failed igniter, element or relay.
What to do: The heating circuit needs testing.
Cause: The oven is overheating because the control or sensor has failed.
What to do: Turn off the breaker. Do not use the oven until a technician has checked it.
Cause: A key has been held too long or the keypad has failed.
What to do: Wipe the panel dry and reset the breaker. If the code returns, the keypad needs replacing.
Cause: The oven control has an internal fault.
What to do: Turn off the breaker for a minute. If it returns, the control needs replacing.
Cause: The control boards have lost communication.
What to do: Turn off the breaker for a minute. If it returns, the boards and harness need testing.
Cause: The temperature sensor or its wiring is open.
What to do: The sensor must be tested and replaced.
Typically about 45 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
The service call is a flat $89 and covers the trip to Cusseta and a full diagnosis. You then get an exact quote for parts and labor before any work starts.