Power cord wired incorrectly
Cause: The power cord is connected to the wrong terminals or the supply voltage is wrong.
What to do: An electrician or technician must check the cord and outlet.
Gas and electric dryers: heating, drum, airflow and control repairs. We reach Cusseta (36852) in about 45 minutes.
What we hear most in Cusseta
| Repair | Typical time | |
|---|---|---|
| Thermal fuse and thermostat replacement | ~40 min · 3 mo warranty | |
| Vent and lint path cleaning | ~45 min · 1 mo warranty | |
| Moisture sensor repair | ~45 min · 3 mo warranty | |
| Heating element replacement | ~60 min · 3 mo warranty | |
| Gas igniter replacement | ~50 min · 3 mo warranty | |
| Belt and roller replacement | ~70 min · 3 mo warranty |
Code on the display?
Cause: The power cord is connected to the wrong terminals or the supply voltage is wrong.
What to do: An electrician or technician must check the cord and outlet.
Cause: The vent duct is clogged with lint or crushed behind the dryer.
What to do: Clean the lint filter and the full length of the vent duct to the outside.
Cause: The vent duct is heavily clogged with lint or crushed.
What to do: Clean the full vent run to the outside before using the dryer again.
Cause: The vent is almost completely blocked. This is a fire risk.
What to do: Stop using the dryer until the vent has been cleaned.
Cause: The dryer is not getting full power, usually a tripped breaker.
What to do: Reset both dryer breakers in the panel.
Cause: The temperature sensor is open or shorted.
What to do: The thermistor needs replacing.
Typically about 45 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
The service call is a flat $89 and covers the trip to Cusseta and a full diagnosis. You then get an exact quote for parts and labor before any work starts.