Thermistor fault
Cause: The temperature sensor is open or shorted.
What to do: The thermistor needs replacing.
Home / Tuskegee / Dryer repair
Gas and electric dryers: heating, drum, airflow and control repairs. We reach Tuskegee (36083, 36088) in about 50 minutes.
What we hear most in Tuskegee
| Repair | Typical time | |
|---|---|---|
| Vent and lint path cleaning | ~45 min · 1 mo warranty | |
| Moisture sensor repair | ~45 min · 3 mo warranty | |
| Heating element replacement | ~60 min · 3 mo warranty | |
| Gas igniter replacement | ~50 min · 3 mo warranty | |
| Belt and roller replacement | ~70 min · 3 mo warranty | |
| Thermal fuse and thermostat replacement | ~40 min · 3 mo warranty |
Code on the display?
Cause: The temperature sensor is open or shorted.
What to do: The thermistor needs replacing.
Cause: The lint screen or vent duct is blocked.
What to do: Clean the lint screen and the whole vent run to the outside.
Cause: One leg of the 240 V supply is missing.
What to do: Reset both dryer breakers in the panel.
Cause: Power was interrupted during a cycle.
What to do: Press and hold Start to resume. If it keeps appearing, the outlet and cord need checking.
Cause: The heating element is open or the heater circuit has failed.
What to do: The heater and its relay need testing.
Cause: A control panel button is shorted.
What to do: Unplug for 2 minutes. If it returns, the control panel needs replacing.
Typically about 50 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
The service call is a flat $89 and covers the trip to Tuskegee and a full diagnosis. You then get an exact quote for parts and labor before any work starts.