Door not locked
Cause: The door is not fully closed or the lock has failed.
What to do: Close the door firmly. If the code stays, the door lock needs replacing.
Home / Tuskegee / Washer repair
From drum bearings to the control board, we fix every washer fault at your home, right in front of you. We reach Tuskegee (36083, 36088) in about 50 minutes.
What we hear most in Tuskegee
| Repair | Typical time | |
|---|---|---|
| Door lock / lid switch repair | ~40 min · 3 mo warranty | |
| Water inlet valve replacement | ~40 min · 3 mo warranty | |
| Control board repair | ~90 min · 3 mo warranty | |
| Drive belt replacement | ~30 min · 3 mo warranty | |
| Suspension and shock replacement | ~75 min · 3 mo warranty | |
| Drain pump replacement | ~45 min · 3 mo warranty | |
| Drum bearing replacement | ~150 min · 3 mo warranty |
Code on the display?
Cause: The door is not fully closed or the lock has failed.
What to do: Close the door firmly. If the code stays, the door lock needs replacing.
Cause: Not a fault: the washer is reminding you to run a Tub Clean cycle.
What to do: Run Tub Clean with the drum empty, or press any button to skip.
Cause: The thermistor is faulty or disconnected.
What to do: The thermistor needs testing.
Cause: Weight on the lid or a failed lid lock is keeping it from releasing.
What to do: Remove anything on the lid and unplug for 2 minutes. If it stays locked, the lock needs replacing.
Cause: The drain hose is pushed too far into the standpipe or the pump is blocked.
What to do: Check the drain hose height and clean the pump filter.
Cause: Water is entering too slowly.
What to do: Open both faucets fully and clean the inlet hose screens.
Typically about 50 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
The service call is a flat $89 and covers the trip to Tuskegee and a full diagnosis. You then get an exact quote for parts and labor before any work starts.