Motor speed signal lost
Cause: The motor tachometer signal is missing.
What to do: The motor and motor control need testing.
From drum bearings to the control board, we fix every washer fault at your home, right in front of you. We reach Lanett (36863) in about 55 minutes.
What we hear most in Lanett
| Repair | Typical time | |
|---|---|---|
| Drive belt replacement | ~30 min · 3 mo warranty | |
| Suspension and shock replacement | ~75 min · 3 mo warranty | |
| Drain pump replacement | ~45 min · 3 mo warranty | |
| Drum bearing replacement | ~150 min · 3 mo warranty | |
| Door lock / lid switch repair | ~40 min · 3 mo warranty | |
| Water inlet valve replacement | ~40 min · 3 mo warranty | |
| Control board repair | ~90 min · 3 mo warranty |
Code on the display?
Cause: The motor tachometer signal is missing.
What to do: The motor and motor control need testing.
Cause: The washer did not fill in the expected time.
What to do: Check both faucets are open and the inlet screens are clean.
Cause: The door failed to lock.
What to do: Close the door firmly. If it repeats, the lock needs service.
Cause: The washer did not drain in the expected time.
What to do: Check the drain hose for kinks and blockages.
Cause: Too much detergent, or non-HE detergent in an HE washer.
What to do: Let the washer finish its rinse routine. Use only HE detergent and less of it.
Cause: The load has shifted to one side of the basket.
What to do: Open the lid, spread the laundry evenly and restart.
Typically about 55 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
The service call is a flat $89 and covers the trip to Lanett and a full diagnosis. You then get an exact quote for parts and labor before any work starts.