Diverter position fault
Cause: The diverter that switches spray arms is not finding its position.
What to do: The diverter motor and sensor need testing.
Home / Valley / Dishwasher repair
Professional repair of wash pumps, drain pumps, inlet valves and heaters. We reach Valley (36854) in about 55 minutes.
What we hear most in Valley
| Repair | Typical time | |
|---|---|---|
| Water inlet valve replacement | ~45 min · 3 mo warranty | |
| Heating element replacement | ~60 min · 3 mo warranty | |
| Door latch and seal repair | ~40 min · 3 mo warranty | |
| Spray arm and filter cleaning | ~40 min · 1 mo warranty | |
| Circulation pump repair | ~90 min · 3 mo warranty | |
| Drain pump replacement | ~45 min · 3 mo warranty |
Code on the display?
Cause: The diverter that switches spray arms is not finding its position.
What to do: The diverter motor and sensor need testing.
Cause: Water took more than 2 minutes to pump out.
What to do: Check the drain hose, air gap and garbage disposal for clogs.
Cause: Water took more than 7 minutes to pump out.
What to do: Clear the drain hose, air gap and disposal connection.
Cause: The dishwasher cannot pump the water out.
What to do: Clear the drain path. If it still won't drain, the pump needs service.
Cause: The float switch is stuck or the dishwasher is overfilling.
What to do: Turn off the water supply. The float and inlet valve need checking.
Cause: The incoming water is not hot enough.
What to do: Run the kitchen hot tap until it is hot before starting, and set the water heater to 120°F.
Typically about 55 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
The service call is a flat $89 and covers the trip to Valley and a full diagnosis. You then get an exact quote for parts and labor before any work starts.