Home / Opelika / Dishwasher repair
Professional repair of wash pumps, drain pumps, inlet valves and heaters. We reach Opelika (36801, 36804) in about 30 minutes.
What we hear most in Opelika
| Repair | Typical time | |
|---|---|---|
| Spray arm and filter cleaning | ~40 min · 1 mo warranty | |
| Circulation pump repair | ~90 min · 3 mo warranty | |
| Drain pump replacement | ~45 min · 3 mo warranty | |
| Water inlet valve replacement | ~45 min · 3 mo warranty | |
| Heating element replacement | ~60 min · 3 mo warranty | |
| Door latch and seal repair | ~40 min · 3 mo warranty |
Code on the display?
Cause: Water has reached the leak sensor in the base.
What to do: Turn off the water supply. If the unit was just installed, check the disposal knockout plug. Otherwise call a technician.
Cause: The water level is too high.
What to do: Turn off the water supply and call a technician.
Cause: The water distributor is not moving to position.
What to do: The distributor motor needs testing.
Cause: A control button was held too long or is jammed.
What to do: Dry the control panel and switch off at the breaker for a minute.
Cause: Water has been detected in the base.
What to do: Turn off the water supply and unplug the dishwasher. The leak must be found.
Cause: Not a fault: the fan is running for 60 minutes after the cycle to dry the dishes.
What to do: Open the door or press Power to stop it.
Typically about 30 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
The service call is a flat $89 and covers the trip to Opelika and a full diagnosis. You then get an exact quote for parts and labor before any work starts.