Vent open
Cause: The drying vent did not close.
What to do: Switch off at the breaker for 5 minutes. If it returns, the vent assembly needs replacing.
Home / Salem / Dishwasher repair
Professional repair of wash pumps, drain pumps, inlet valves and heaters. We reach Salem (36874) in about 40 minutes.
What we hear most in Salem
| Repair | Typical time | |
|---|---|---|
| Water inlet valve replacement | ~45 min · 3 mo warranty | |
| Heating element replacement | ~60 min · 3 mo warranty | |
| Door latch and seal repair | ~40 min · 3 mo warranty | |
| Spray arm and filter cleaning | ~40 min · 1 mo warranty | |
| Circulation pump repair | ~90 min · 3 mo warranty | |
| Drain pump replacement | ~45 min · 3 mo warranty |
Code on the display?
Cause: The drying vent did not close.
What to do: Switch off at the breaker for 5 minutes. If it returns, the vent assembly needs replacing.
Cause: The supply valve is closed or the inlet is restricted.
What to do: Open the supply valve fully and check the inlet hose.
Cause: The filter, drain hose or disposal connection is clogged.
What to do: Clean the filter and the drain path.
Cause: Water has been detected in the base pan.
What to do: Turn off the water supply and call a technician.
Cause: The pressure sensor is not reading correctly.
What to do: The sensor needs replacing.
Cause: The circulation motor has failed or is blocked.
What to do: The motor needs testing and replacing.
Typically about 40 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
The service call is a flat $89 and covers the trip to Salem and a full diagnosis. You then get an exact quote for parts and labor before any work starts.