Wash motor fault
Cause: The circulation motor has failed or is blocked.
What to do: The motor needs testing and replacing.
Home / Smiths Station / Dishwasher repair
Professional repair of wash pumps, drain pumps, inlet valves and heaters. We reach Smiths Station (36877) in about 45 minutes.
What we hear most in Smiths Station
| Repair | Typical time | |
|---|---|---|
| Heating element replacement | ~60 min · 3 mo warranty | |
| Door latch and seal repair | ~40 min · 3 mo warranty | |
| Spray arm and filter cleaning | ~40 min · 1 mo warranty | |
| Circulation pump repair | ~90 min · 3 mo warranty | |
| Drain pump replacement | ~45 min · 3 mo warranty | |
| Water inlet valve replacement | ~45 min · 3 mo warranty |
Code on the display?
Cause: The circulation motor has failed or is blocked.
What to do: The motor needs testing and replacing.
Cause: The water is not heating.
What to do: The heater circuit needs testing.
Cause: The control panel and main board have lost communication.
What to do: Switch off at the breaker for 5 minutes. If it returns, call a technician.
Cause: The power module or heater circuit has failed.
What to do: Switch off at the breaker for 5 minutes. If it returns, the control module needs service.
Cause: The flow-through heater has failed.
What to do: The heater is replaced, usually together with the pump.
Cause: The dishwasher can't measure the incoming water.
What to do: Check the water supply. If it returns, the flow sensor needs replacing.
Typically about 45 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
The service call is a flat $89 and covers the trip to Smiths Station and a full diagnosis. You then get an exact quote for parts and labor before any work starts.