Stuck button
Cause: A button on the control panel is jammed or held down.
What to do: Press each button to free it. If the code stays, the panel needs service.
Home / Smiths Station / Washer repair
From drum bearings to the control board, we fix every washer fault at your home, right in front of you. We reach Smiths Station (36877) in about 45 minutes.
What we hear most in Smiths Station
| Repair | Typical time | |
|---|---|---|
| Suspension and shock replacement | ~75 min · 3 mo warranty | |
| Drain pump replacement | ~45 min · 3 mo warranty | |
| Drum bearing replacement | ~150 min · 3 mo warranty | |
| Door lock / lid switch repair | ~40 min · 3 mo warranty | |
| Water inlet valve replacement | ~40 min · 3 mo warranty | |
| Control board repair | ~90 min · 3 mo warranty | |
| Drive belt replacement | ~30 min · 3 mo warranty |
Code on the display?
Cause: A button on the control panel is jammed or held down.
What to do: Press each button to free it. If the code stays, the panel needs service.
Cause: The door latch or lock is faulty.
What to do: Close the door firmly. If the code stays, the lock assembly needs replacing.
Cause: The water temperature sensor is reading out of range.
What to do: The sensor and heater circuit need testing.
Cause: A leak has been detected inside the washer.
What to do: Turn off the water and unplug the washer. The leak must be found and fixed.
Cause: The motor is drawing too much current: overloaded drum or a motor fault.
What to do: Reduce the load and unplug for 30 minutes. If it returns, call a technician.
Cause: Not a fault: the control panel is locked.
What to do: Hold the Child Lock button for 3 seconds to unlock.
Typically about 45 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
The service call is a flat $89 and covers the trip to Smiths Station and a full diagnosis. You then get an exact quote for parts and labor before any work starts.