Child lock is on
Cause: Not a fault: the control panel is locked.
What to do: Hold the Child Lock button for 3 seconds to unlock.
Home / Notasulga / Washer repair
From drum bearings to the control board, we fix every washer fault at your home, right in front of you. We reach Notasulga (36866) in about 45 minutes.
What we hear most in Notasulga
| Repair | Typical time | |
|---|---|---|
| Drain pump replacement | ~45 min · 3 mo warranty | |
| Drum bearing replacement | ~150 min · 3 mo warranty | |
| Door lock / lid switch repair | ~40 min · 3 mo warranty | |
| Water inlet valve replacement | ~40 min · 3 mo warranty | |
| Control board repair | ~90 min · 3 mo warranty | |
| Drive belt replacement | ~30 min · 3 mo warranty | |
| Suspension and shock replacement | ~75 min · 3 mo warranty |
Code on the display?
Cause: Not a fault: the control panel is locked.
What to do: Hold the Child Lock button for 3 seconds to unlock.
Cause: Too much water: a stuck inlet valve or a level sensor fault.
What to do: Turn off the water and unplug the washer. Call a technician.
Cause: Water in the supply or drain hose has frozen.
What to do: Thaw the hoses with warm water and move the washer to a warmer room.
Cause: A faucet is closed or the water pressure is very low.
What to do: Check the faucets and the inlet screens.
Cause: The drum is overloaded or the rotor position sensor is faulty.
What to do: Reduce the load and unplug the washer for 30 minutes. If it happens again, call a technician.
Cause: The drain filter is blocked or the hose is kinked.
What to do: Open the filter behind the lower front cover and clean it.
Typically about 45 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
The service call is a flat $89 and covers the trip to Notasulga and a full diagnosis. You then get an exact quote for parts and labor before any work starts.