Flow sensor fault
Cause: The dishwasher can't measure the incoming water.
What to do: Check the water supply. If it returns, the flow sensor needs replacing.
Home / Notasulga / Dishwasher repair
Professional repair of wash pumps, drain pumps, inlet valves and heaters. We reach Notasulga (36866) in about 45 minutes.
What we hear most in Notasulga
| Repair | Typical time | |
|---|---|---|
| Door latch and seal repair | ~40 min · 3 mo warranty | |
| Spray arm and filter cleaning | ~40 min · 1 mo warranty | |
| Circulation pump repair | ~90 min · 3 mo warranty | |
| Drain pump replacement | ~45 min · 3 mo warranty | |
| Water inlet valve replacement | ~45 min · 3 mo warranty | |
| Heating element replacement | ~60 min · 3 mo warranty |
Code on the display?
Cause: The dishwasher can't measure the incoming water.
What to do: Check the water supply. If it returns, the flow sensor needs replacing.
Cause: An internal leak has tripped the float switch — a hose, the pump seal or the sump.
What to do: Turn off the water supply and unplug the dishwasher. A technician has to locate the leak.
Cause: Water is entering when it shouldn't, usually a leaking inlet valve.
What to do: Turn off the water supply. The inlet valve needs replacing.
Cause: Too much water entered the dishwasher.
What to do: Turn off the water supply and call a technician.
Cause: Not enough water is entering: closed valve, kinked hose or low pressure.
What to do: Open the supply valve fully and straighten the inlet hose.
Cause: The wash pump has an electrical fault.
What to do: The pump needs testing and replacing.
Typically about 45 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
The service call is a flat $89 and covers the trip to Notasulga and a full diagnosis. You then get an exact quote for parts and labor before any work starts.