Ignition failure
Cause: No gas supply or a failed igniter.
What to do: Check the gas valve is open and press Reset. If it repeats, call a technician.
You can check this yourself
Book a repair
Boiler repair in Salem, AL
Annual boiler tune-ups plus igniter, pump and control repair. We reach Salem (36874) in about 40 minutes.
What we hear most in Salem
Boiler problems we fix
Shows an error codePressure keeps droppingWon't igniteNo hot waterRadiators stay coldNoisy
| Repair | Typical time | |
|---|---|---|
| Control board repair | ~120 min · 3 mo warranty | |
| Annual tune-up | ~75 min · 3 mo warranty | |
| Igniter and flame sensor replacement | ~60 min · 3 mo warranty | |
| Circulator pump replacement | ~90 min · 12 mo warranty | |
| Heat exchanger flush | ~90 min · 3 mo warranty | |
| Expansion tank service | ~45 min · 3 mo warranty |
Code on the display?
Boiler error codes
Flame loss
Cause: The flame went out during operation.
What to do: Reset the boiler. If it continues, the flame rod and gas pressure need checking.
Needs a technician
Book a repair
Overheating
Cause: Poor circulation or a blocked heat exchanger.
What to do: Turn the boiler off and let it cool. The pump and heat exchanger need checking.
Needs a technician
Book a repair
Vent blockage
Cause: The air intake or exhaust is blocked.
What to do: Check the vent terminations outside for blockages.
You can check this yourself
Book a repair
Supply temperature sensor fault
Cause: The heating supply thermistor has failed.
What to do: The sensor needs replacing.
Needs a technician
Book a repair
Return temperature sensor fault
Cause: The heating return thermistor has failed.
What to do: The sensor needs replacing.
Needs a technician
Book a repair
01How fast can you get to Salem for a boiler repair?
Typically about 40 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
02What does a boiler repair visit cost in Salem?
The service call is a flat $89 and covers the trip to Salem and a full diagnosis. You then get an exact quote for parts and labor before any work starts.