High limit tripped
Cause: The boiler overheated: low water flow, air in the system or a failed pump.
What to do: Check the pressure and bleed the radiators. If it returns, call a technician.
You can check this yourself
Book a repair
Boiler repair in Auburn, AL
Annual boiler tune-ups plus igniter, pump and control repair. We reach Auburn (36830, 36832, 36849) in about 25 minutes.
What we hear most in Auburn
Boiler problems we fix
Won't igniteNo hot waterRadiators stay coldNoisyShows an error codePressure keeps dropping
| Repair | Typical time | |
|---|---|---|
| Igniter and flame sensor replacement | ~60 min · 3 mo warranty | |
| Circulator pump replacement | ~90 min · 12 mo warranty | |
| Heat exchanger flush | ~90 min · 3 mo warranty | |
| Expansion tank service | ~45 min · 3 mo warranty | |
| Control board repair | ~120 min · 3 mo warranty | |
| Annual tune-up | ~75 min · 3 mo warranty |
Code on the display?
Boiler error codes
Flame not detected
Cause: Gas pressure is weak or the ionization electrode is dirty.
What to do: Reset it. If it continues, the electrode needs cleaning.
Needs a technician
Book a repair
False flame signal
Cause: The control sees a flame when the burner is off.
What to do: A technician must check the electrodes and control board.
Needs a technician
Book a repair
Flame after gas shut-off
Cause: A flame is still detected after the gas valve closed.
What to do: Turn off the gas supply and call a technician.
Needs a technician
Book a repair
Ignition failure
Cause: No gas supply or a failed igniter.
What to do: Check the gas valve is open and press Reset. If it repeats, call a technician.
You can check this yourself
Book a repair
Flame loss
Cause: The flame went out during operation.
What to do: Reset the boiler. If it continues, the flame rod and gas pressure need checking.
Needs a technician
Book a repair
01How fast can you get to Auburn for a boiler repair?
Typically about 25 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
02What does a boiler repair visit cost in Auburn?
The service call is a flat $89 and covers the trip to Auburn and a full diagnosis. You then get an exact quote for parts and labor before any work starts.