Water pressure too high
Cause: System pressure is over the limit: failed fill valve or expansion tank.
What to do: Do not keep resetting it. The expansion tank and fill valve need checking.
Needs a technician
Book a repair
Home / Phenix City / Boiler repair
Boiler repair in Phenix City, AL
Annual boiler tune-ups plus igniter, pump and control repair. We reach Phenix City (36867, 36869, 36870) in about 60 minutes.
What we hear most in Phenix City
Boiler problems we fix
Won't igniteNo hot waterRadiators stay coldNoisyShows an error codePressure keeps dropping
| Repair | Typical time | |
|---|---|---|
| Igniter and flame sensor replacement | ~60 min · 3 mo warranty | |
| Circulator pump replacement | ~90 min · 12 mo warranty | |
| Heat exchanger flush | ~90 min · 3 mo warranty | |
| Expansion tank service | ~45 min · 3 mo warranty | |
| Control board repair | ~120 min · 3 mo warranty | |
| Annual tune-up | ~75 min · 3 mo warranty |
Code on the display?
Boiler error codes
Hot water sensor fault
Cause: The domestic hot water temperature sensor has failed.
What to do: The sensor needs replacing.
Needs a technician
Book a repair
Fan speed fault
Cause: The combustion fan is not reaching the right speed.
What to do: The fan needs testing and replacing.
Needs a technician
Book a repair
Water pressure too low
Cause: System pressure has dropped below the minimum.
What to do: Top the system up to 12–15 psi. If it keeps dropping, there is a leak.
You can check this yourself
Book a repair
High limit tripped
Cause: The boiler overheated: low water flow, air in the system or a failed pump.
What to do: Check the pressure and bleed the radiators. If it returns, call a technician.
You can check this yourself
Book a repair
Flame not detected
Cause: Gas pressure is weak or the ionization electrode is dirty.
What to do: Reset it. If it continues, the electrode needs cleaning.
Needs a technician
Book a repair
01How fast can you get to Phenix City for a boiler repair?
Typically about 60 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
02What does a boiler repair visit cost in Phenix City?
The service call is a flat $89 and covers the trip to Phenix City and a full diagnosis. You then get an exact quote for parts and labor before any work starts.